The equipment listed below refers to equipment that has been completely built and is ready to be shipped or equipment that is in the process of being built and can be shipped relatively soon. If you find that the equipment listed doesn't quite meet your application's needs, or you're interested in more information on a certain piece of equipment, call or email us today and we'll see what we can do to fit your particular needs.
Dual-head workhorse for seam heights of 48" - 96" (1.2m - 2.4m). Offset booms drill near rib while allowing a wider operator exit way toward rear of machine. Rugged ATRS usually eliminates the need to set temporary posts and jacks. Designed to install a full row of support from one chassis position.More Info
Greater flexibility for your high-seam operation. Heavy-duty boom extends over rubble and loose bottom. Operates in seam heights from 6' to 17'. Booms swing from 4' to 20' to allow several installations from one chassis position. Mast tilts for vertical, angle or horizontal drilling. Walk-thru chassis. Optional material handling system.More Info
This degasification drill is designed to drill horizontally up to 5000' (1524m) into the working coal face, for methane drainage, dewatering and seam orientation. These machines vary in torque and thrust capacities according to the application. Fletcher offers machines from 10,000 lbs. (4535.9kg) to 50,000 lbs. (22,680kg) thrust and typically use "NQ" or "BQ" size drill rods.More Info
One set of 60” feed, 10” sump R.H. & L.H. offset drill booms for RRII. Each boom includes rebuilt structure if available, rebuilt cylinders (sump, foot, & feed), rebuilt drillheads, support posts, new canopies, boom mounting kits, new Manuli Rock Master 4000 PSI hoses with JIC fittings, single valve bank joystick drilling controls, new handles, linkages and tags, plug-in start switch with new plug in stop switches, new cable and conduit and new dust hose.More Info
One set of reconditioned 72" feed, 18" sump R.H. & L.H. offset drill booms for RRII. Booms feature manual joystick feed and rotation control with feed boost, adjustable bolt torque circuit with thrust relief, and feed package valve (NO rotation flow control), new standard 4000 PSI hose with new JIC fittings.More Info
One set of reconditioned 84" feed, 18" sump R.H. & L.H. offset drill booms for RRII. Booms feature manual joystick feed and rotation control with feed boost, adjustable bolt torque circuit with thrust relief, and feed package valve (NO rotation flow control), new standard 4000 PSI hose with new JIC fittings.More Info
One set of reconditioned R.H. & L.H. linear extending drill booms for HDDR with 24" of extend and 48" of boom lift. Booms include rebuilt cross heads, new mast feed chains, repaired drillhead carriages, new bearings, rebuilt cylinders, manual joystick feed and rotation controls with feed boost, bolt torquing circuit with thrust relief, hydraulic disconnect, and standard 4000 PSI hoses with JIC fittings.More Info