3000 Series Remote Bolter

Remote Operated Roof Bolter

The Fletcher 3000 Series Roof Bolter is designed for bolting in high roof conditions up to 35 feet. Once the bolt carousel is loaded, drilling, resin insertion, and bolting is all done from the enclosed operator’s cab. Boom lifts, swings, and extends to allow multiple installations from one chassis position. Heavy-duty Fletcher systems assure long life, maximum reliability and productivity.

Fletcher Options

  • Feedback drilling system
  • Microprocessor drill controls
  • Dry dust collection
  • Pneumatic resin insertion
  • Heated / air conditioned cab
  • Mat holder, mesh clamps
  • Rotary percussive drill
  • Mast tilt
  • Hydraulic power take-off
  • Powershift transmission drive for speeds up to 12 mph

General Specifications

  • Diesel System

  • EPA Tier II approved diesel engine.
  • Hydraulic System

  • Maximum working pressure: 5000 psi.
  • Filtration: magnetic in-tank, Pall high pressure.
  • Hand-operated fill pump with screened intake.
  • JIC hose fittings.
  • Drive System

  • Hydrostatic 0-6 mph John Deere axles.
  • Drilling System

  • Chain driven single pass drill feed with 20” of crowd.
  • Designs for up to an 14ft bolt.
  • Standard Equipment

  • 144 HP John Deere Engine
  • 4 wheel internal wet disc brakes
  • Deep chuck drill head
  • Articulating chassis
  • 4 wheel drive with John Deere Axles
  • MSHA rated cab and canopy
  • Load sensing hydraulic system with piston pump
  • Front Outriggers
  • Turntable mounted cab and boom (cab swings with boom)
  • Features

  • Boom Swing
  • Boom Sump
  • Boom Lift
  • Overall Length
  • Overall Width
  • Chassis Height
  • Ground Clearance
  • Weight
  • 40° either side of center
  • 7' (2134mm)
  • Up to 65°
  • 34' (10360mm)
  • 10' (3048mm)
  • 9.6' (2896mm)
  • 12' (3658mm)
  • 50,000 lbs. (22680kg)

Download the Spec Sheet

3000 Series Remote Bolter Specifications Sheet | This document requires Adobe Reader.
J. H. Fletcher & Co.™ cannot anticipate every mine hazard that may develop during use of these products. Follow your mine plan and/or roof control plan prior to use of the product. Proper use, maintenance and continued use of (OEM) original equipment parts will be essential for maximum operating results.